No of items: 0
Your basket is empty
RJ45 adaptors, splitters, economisers and couplers. If the solution you are looking for is not detailed here please do not hesitate to call us on 01823 653100 or use the contact us form link at the top of the page.
For Cat5e & Cat6 UTP Patch cables please see main Cat5e & Cat6 category.
Please CLICK HERE FOR RJ45 Patch cables and other directly related RJ45 equipment.
| Ex Vat | Inc Vat | ||
|---|---|---|---|
| RJ45 Cat5e Crimp Plug A107010 | £12.00* | £14.10* | |
)
Bag of 100 cat5e UTP crimp plugs to suit solid or stranded cable
|
|||
| RJ45 Cat5 CouplerI702020 | £0.80* | £0.94* | |
)
Cat5 coupler (RJ45 female - RJ45 female) sold singularly. Extends any RJ45 Patch Cable including Cat6 but only performs to Cat5 requirements.
|
|||
| RJ45 Cat6 CouplerI702030 | £2.65 | £3.11 | |
)
Cat6 coupler (RJ45 female - RJ45 female) sold singularly. Extends any RJ45 Patch Cable but performs to Cat6 requirements.
|
|||
| RJ45 Economiser / Cat5e SplitterI702040 | £3.83 | £4.50 | |
)
Sold singularly, but usually required in pairs. Nearly all Cat5e & Cat6 installations use only half of the 4 pairs contained within the cable. With one RJ45 Economiser (aka Cat5e Splitter) at the wall socket/desk end and another at the patch panel these devices allow the user to make use of the dormant pairs and negate the need to re-cable from the cabinet for an extra socket. NB These RJ45 economisers / Cat5e Splitters are compatible with Cat6 but are only rated to Cat5e. |
|||
| USB A Type to RJ45I702050 | £13.45 | £15.80 | |
)
USB Type A Male to RJ45 Female 10/100 adaptor with Activity LED. This is a USB 2.0 compliant product but it's capabilities are restricted by USB's 5 meter maximum distance. For USB extenders please see product below.
|
|||
| USB over RJ45 - ExtenderI702060 | £13.91 | £16.35 | |
Extend your USB connection by up to 50 metres. Example: Need to control your USB printer 30 metres away from your PC but are restricted by USB's 5 metre limitation? One of these at each end connected with a standard Cat5e Patch Cable will solve your problem. Sold in pairs.
|
|||
Q: Is there a double female port i can use to connect ethernet to ethernet there by extending the length?
A: I believe you need a coupler I702020 (2nd product down). It is the same on the other side.
I have an RJ45 cable running from modem to existing PC. I want to put another PC in same room without additional cable. Can I use this splitter for this? Will I need two or can I just split the feed at the PC end? Thanks.
You will always need two. Trying to explain this in a brief message without pictures is difficult, but if you were to imagine that you have one cable linking two rooms, then you will need one of these each end. (if your cables have plugs on the end then you will also require an RJ45 coupler on each end). When used in pairs, this product basically takes two sources in two sockets and sends them down one cable and then splits again the other end in to two sockets. It does not split the signal, only a switch can do this. We will attempt to illustrate this on the site soon.
Q: hello, will the economiser work between my powerline plug and a wii ? I want to have my home network available at both the wii and my netgear eva 8000, thought this bit of kit might do the job, am I right ?
Thanks
A: Without knowing the location of everything it is difficult to answer. But basically you need two inputs at one end (e.g. from a switch or router) to give two outputs at the other.
Q: Can I use this to run from a PC to a USB device say 50 metres away and convert back to USB at the other end. SO basically I am using existing RJ45 cable to a patch panel to connect to a USB device in a seperate loacation ?
A: The I702050 will not do this and we have added some text to it's description to point this out. However, the I702060 will! You need two, it is a new product to us and was not published on the website due to lack of a decent image and spec sheet, however I have ticked the box so it is published and available to buy. Images and tech data will follow in the next few days.
Q: Hi. Can I put this in back of my modem then plug two cables into it so i can go on internet down stairs and play xbox live upstairs. Please advise. Thank you.
A: No. If your modem only has 1x RJ45 socket on it then you will need a switch. I.E 1x cable from your modem to your switch, then 1 cable from your switch to downstairs and the other cable from your switch to upstairs. Our switches are 19" rack mountable business class products and an 8 port (at time of writing) costs £27 + vat + delivery. You should be able to pick up a cheap 4 or 5 port plastic unit your local computer shop for about £15 inc vat.
Further info: In short, This product is intended to make use of the normally redundant pair in a cat5 cable and must be used in pairs to achieve this, 1 at the source, be it a router, switch or patch panel and one at the other end, e.g. a wall mounted RJ45 Socket.
