TP-Link EAP225 WALL: Dual-Band WiFi Access Point Wall Mounted Faceplate

Part: H010620
  • Brand: TP-Link
  • Availability: Discontinued / End of Life / Replaced
Now End Of Life and Replaced by the TP-Link EAP 235 Wall

  • The EAP225-Wall is a Slim-line minimalistic access point designed to fit any standard flush 86mm x 86mm (1 gang) wall pattress box and therefore can be fitted in place of most existing flush mounted RJ45 Ethernet outlets. At just 11mm thick blends into any home or office.
  • With minimal installation costs, the EAP225-Wall is an ideal solution for hotels and guest houses looking to upgrade their guest rooms wall mounted network outlets and provide guests with a private WiFi network
  • 802.3af/802.3at PoE Power over Ethernet supported means you only need an ethernet connection to supply the unit with both power and data. It's PoE outlet allows for the connection of another PoE device e.g. IP Phone, Camera, Intercomms etc
  • Dual Band: 5GHz: Up to 867Mbps - 2.4GHz: Up to 300Mbps

Please enter a valid email address

  • from £60.52
  • Incl. VAT: £72.62

0 reviews / Write a review

Tp-Link Omada EAP225: Overall dimensions 143 × 86 × 19.7mm - Qualcomm Chipset

All of the features of the popular EAP225 867Mbps N WiFi Access Point but with mounting plate allowing installation on to a UK (&EU) standard 86mm x 86mm wall plate allowing for flush mounting on a wall. 3x RJ45 10/100 Switch. Dual Band: 867Mbps @ 5Ghz + 300Mbps @ 2.5Ghz 802.3af/802.3at PoE with centralized management Once flush mounted to a standard 86mm wall box/pattress only 11mm of faceplate is visible. Total depth 21mm. NB Allow room for an RJ45 ethernet cable at the rear.

EAP225-wall datasheet

HARDWARE FEATURES
Interface 1 × 10/100Mbps Ethernet uplink port accepts 802.3af/at power supply as PoE power device (PD)
2 × 10/100Mbps Ethernet Port
1 × 10/100Mbps with PoE pass-thru (requires 802.3at PoE+ power supply on PD port.)
Physical Security Lock Yes
Button Reset
Power Supply 802.3af or 802.3at PoE
Power Consumption 9 watts or
25.5 watts including PoE Out
Dimensions 5.6 × 3.4 × 0.8 in.
(143 × 86 × 19.7mm)
Antenna 2 Dual-Band Antennas
2.4GHz: 2 × 3dBi
5GHz: 2 × 4dBi
Mounting Wall Plate Mounting
WIRELESS FEATURES
Wireless Standards IEEE 802.11n/g/b/ac
Frequency 2.4GHz and 5GHz
Signal Rate 5GHz: Up to 867Mbps
2.4GHz: Up to 300Mbps
Wireless Functions 16 SSIDs?Up to 8 SSIDs on each band?
Enable/Disable Wireless Radio
Automatic Channel Assignment
Transmit Power Control (Adjust Transmit Power on dBm)
QoS(WMM)
Load Balance
Rate Limit
Reboot Schedule
Wireless Schedule
Wireless Statistics based on SSID/AP/Client
Wireless Security Captive Portal Authentication
Access Control
Wireless Mac Address Filtering
Wireless Isolation Between Clients
SSID to VLAN Mapping
Local LAN port based VLAN
Rogue AP Detection
802.1X Support
64/128/152-bit WEP / WPA / WPA2-Enterprise,
WPA-PSK / WPA2-PSK
Transmission Power 21dBm max. (2.4 GHz)
21 dBm max. (5 GHz)
MANAGEMENT
Omada Cloud Access Yes
Omada App Yes
Omada Cloud Controller Yes
Omada Controller Software Yes
Email Alerts Yes
LED ON/OFF Control Yes
Management MAC Access Control Yes
SNMP v1,v2c
System Logging Local/Remote Syslog Local/Remote Syslog
SSH Yes
Web-based Management HTTP/HTTPS
L3 Management Yes
Multi-site Management Yes
Management VLAN Yes
OTHERS
Certification FCC, RoHS
Package Contents AC1200 MU-MIMO Wall-Plate Access Point
EAP225-Wall
Installation Guide
Mounting Screw
Environment Operating Temperature: 0?~40? (32?~104?)
Storage Temperature: -40?~70? (-40?~158?)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha